Neles™ Switchguard™ SG9000
See all products
The Stonel Hawkeye™ HK and HX series solid state sensors are the perfect options for point sensing in corrosive and hazardous process environments. The standard Red/Green LEDs also speed your setup and installation by confirming power up and switch status. The Hawkeye is FM and CSA approved for nonincendive applications and intrinsically safe circuits in hazardous areas.
The Stonel Hawkeye™ HK and HX series solid state sensors are the perfect options for point sensing in corrosive and hazardous process environments. The standard Red/Green LEDs also speed your setup and installation by confirming power up and switch status. The Hawkeye is FM and CSA approved for nonincendive applications and intrinsically safe circuits in hazardous areas.
Red and green Hawkeye™ sensor pairs are adjusted to function independently in either long stroke or short stroke applications down to 4 mm (6 mm with HX series). Existing valve hardware may be used to activate the Hawkeye™, reducing the need for expensive magnets and triggering devices and speeding up installation.
The stainless steel casing of the Stonel Hawkeye™ HX series is built for use in explosive environments. It features a solid state proximity sensor that is protected by a urethane potting material that absorbs shocks. Standard choices include outputs for NAMUR or universal switching (EN 60947-5-6; I.S.).
|
HK30 / HK31:
|
Universal voltage switching
|
|
HK40:
|
Namur sensors (7-24 VDC)
|
|
Temperature range:
|
-40 °C … +80 °C / -40 °F … +176 °F
|
|
Material:
|
316 stainless steel with polycarbonate tip
|
|
Hazardous area approvals:
|
Ex i, Class I, Division 2 see Approvals tab
|
|
HX35:
|
Universal voltage switching
|
|
HX45:
|
Namur sensors (5-29 VDC)
|
|
Temperature range:
|
-40 °C … +80 °C / -40 °F … +176 °F
|
|
Material:
|
316 stainless steel
|
|
Hazardous area approvals:
|
Ex i, Ex d, Class I, Division 1, Class I, Division 2
|
