Dilute the gas directly at the sample point, dilution ratio 500:1 down to 10:1 SP2000-H/DIL -Based on probe SP2000H/…. -Electrically […]
Dilute the gas directly at the sample point, dilution ratio 500:1 down to 10:1 SP2000-H/DIL -Based on probe SP2000H/…. -Electrically heated up to 180?C -External critical orifice is heated -Including a dilution gas pre-heater -No dew point problems -Dilution rates from 10:1 up to 500:1 -With check gas connection -Independent of the process temperature -Easy operation and maintenance Application: The electrically heated M&C dilution probe is applicable for such processes, where the measuring procedure or the handling of the process gas require the dilution of the sample respectively the component to be measured. Typical applications are the use with toxic gases, the moisture measurement and the emission measurement in flue gases. The M&C dilution probe SP2000H/DIL… is based on the well tested M&C gas sample probe SP2000H. This enables the user to adapt the probe to nearly every application, using for example special filter techniques or special