Logo
Home / / products / Magnetostrictive Level Transmitters

Magnetostrictive Level Transmitters

About Magnetostrictive Level Transmitters

ABB's K-TEK level products' magnetostrictive transmitters are used extensively around the world to provide continuous level indication and transmission of an analog and/or digital signal for monitoring or control.

Technical Specifications
Visit ABB
Product Page
Visit ABB

REQUEST A QUOTE
Description

ABB’s K-TEK level products’ patented sensor technology allows the LMT series transmitters to be used in the most challenging of industrial level applications such as interface measurement, compressor level and separator level applications. In addition, the LMT Series Level Transmitters are the only magnetostrictive level transmitters in the world to be certified for use in SIL2 and SIL3 systems per IEC61508.

Every day, we solve high accuracy and challenging applications. We can help you with yours.

ABB’s K-TEK level products’ magnetostrictive transmitters are used extensively around the world to provide continuous level indication and transmission of an analog and/or digital signal for monitoring or control. The unique design allows increased level sensing resolution which is more than 100 times greater than a conventional reed switch type device. The Magnetostrictive Level Transmitter versatility allows direct in-tank installation (LMT100) or external mounting (LMT200) to a magnetic level gauge. HART and FOUNDATION Fieldbus options make our magnetostrictive level transmitters easy to connect digitally to most control systems.

Options:
  • Two level indications
  • RTD for process temperature measurement
  • Glass viewing window
  • 316/L Stainless Steel enclosure
  • 21-point linearization table

 

Industries served:
  • Oil and Gas
  • Petrochemical
  • Chemical
  • Power Generation
  • Water and wastewater treatment
  • Pulp and Paper
  • Biotech
  • Marine
Features
  • High accuracy: 0.01% of full scale or + 1.27mm
  • Never requires re-calibration: set it & forget it
  • Local indication with HMI display
  • Dual compartment housing with separate field terminal compartment
  • Loop powered to 22m (75ft) probe length
  • Total and/or interface level measurement
  • Pressure to 165.48 bar (2400 psig) Std. 124.1 bar (1800 psig)
  • Temperature range: -195.5 to 426.6ºC (-320 to 800ºF) with options
  • Field replaceable/upgradable electronics module
  • Built-in RFI/EMI filter
  • Digital communications
Downloads